PedalStand

Need a way to keep a guitar pedal on your desk, but still be easily readable/accessible? Look no further than our lightweight modular pedal stand!

We've created a modular easy-to-assemble multi-sized stand ready for you to print and use! You can use as many legs and crossbars as you want or need.  The top-rear slots are setup for a “ladder” style crossbar for you to attach velcro to for cable management.

You'll find 3 different leg widths, and multiple widths of the crossbars and ladders.  The crossbars and ladders also have 2 different “tolerences” for the pegs that slide into the legs. We suggest printing a leg, and a small crossbar of each tolerance, to see which works better for your printer.

Want to make your own crossbar? The hole size is 5.25mm x 5.25mm, have fun! (Which means the .1 tolerence files have 5.15mm pegs, and the .25tolerence files have 5mm pegs)

The ladder also uses 5.25mm x 5.25mm holes for both holes, and the center of the holes are 19.684 mm apart. Don't ask why it ended up that way; it just did, this is free, have fun =)

The crossbar/ladder width is the usable width, and does not include the peg extensions that insert into the legs. The legs allow for bar pegs on both sides, so you can even chain multiple sections together and make a super-long pedal stand for your desk!

At a minimum, you'll want 2 legs, 3 crossbars, and 1 ladder (or if you don't want velcro, a single extra crossbar instead).

No Supports Needed! Just print everything on its side!

Don't have a printer but want this stand? Head over to our website @ https://pedalnetics.com and we can print it for you!