Presta Valve Cap
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.21 – €0.25 net (excluding VAT)
For file: presta-pouou_01mm_petg_mk3s_17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.23 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 16.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Wanted a cap that sat a little firmer on, as they tend to fall off, or crack when you try to make them sit well.
- Rating
- 4.933 / 5
- Likes
- 275
- Downloads
- 2,903
- Makes
- 54
- Views
- 7,049
- Reviews
- 45
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Wanted a cap that sat a little firmer on, as they tend to fall off, or crack when you try to make them sit well.
Recommends printing with maximum 0.1 layer height. Printing multiple at once is no problem. Remember dry filament.
You might have to scale it up just a litle bit,depending on your printer. 1-5%.
I also included a g-code / 3MF with 9 pcs. This can of course be changed easily! :-)
Let me know if there are any problems.
Print instructions
Layer height <0.10