Xiaomi Aqara Zigbee Motion Sensor Mounts
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.79 – €0.96 net (excluding VAT)
For file: pir-type-1.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.88 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 58.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Corner and flat mounts for Aqara sensors - The corners are overly large as to cover / match the anchors of existing…
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 67
- Makes
- 1
- Views
- 860
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Corner and flat mounts for Aqara sensors - The corners are overly large as to cover / match the anchors of existing sensor mounts I had.
Print instructions
Prints without supports. Each type requires a sensor 'cup' to be printed with it, and the cup and mount are connected with an M3 screw of appropriate length and an M3 nut.
mount-1 is the flat wall mount.
mount-2 is the corner one.
each G-code file include 1 cup and 1 mount.