Cat Toy - Hanging Rattle Ball
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€13.25 – €16.19 net (excluding VAT)
For file: Hanging Rattle Cat Ball.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €14.72 excluding VAT (range midpoint).
- Weight reported by the author
- 95 g
- Print time reported by the author
- 19 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a cat toy that can be hung from the ceiling or any other sturdy surface. The ball rattles when hit.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 156
- Makes
- 0
- Views
- 629
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial
Overview - This model contains a (roughly) 15mm ball that can be hung from the ceiling using a piece of string. Inside, is a smaller ball that rattles around when knocked/pushed. This model can be both scaled up or down.
Assembly - This model is print in place, all you have to do is free the inner ball. Use a thin object like a pencil and the ball should easily become dislodged. You will need some string to thread through the top of the ball.
Print Settings - Recommend using the gcode provided but if you want to slice it yourself -
0.4mm Nozzle
10% Infill
No Supports
Add Brim