1 / 2
Multicolor Prusa Mini Front Plate Letters
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just for the shake of adding white letters in the hexagonal pattern front plate.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 0
- Views
- 249
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It contains all the required holes so you don't have to remove the cover for tightening the Y axis belt.
If you want to print it with a single extruder machine like me, you can do it in two separate prints: first the letters, and without removing it from buildplate, print the plate.
The tricky part is to align the pieces so that the autolevel routine do not measure right above the letters when printing the second piece. I include my .3mf setup, but it might not be the same as yours! Check before printing