1 / 5
tilting frame for flexible 100W solar panel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
use 20mm diameter PVC pipe (electrical pipe in Europe), cut them at the right dimension for your panel and insert…
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 49
- Makes
- 0
- Views
- 679
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
- use 20mm diameter PVC pipe (electrical pipe in Europe),
- cut them at the right dimension for your panel and insert corners, and middle parts.
- use M6 screws and nuts to fix the corners and the middle parts
- attach a small rope to keep the foot at the right angle
That's it !
The foot is cut into two pieces so that you can get the classical angles for the different seasons :
- winter 60°
- spring and autumn 40°
- summer 20°
I have printed these parts using PET plastic bottle filament. see here : https://www.thingiverse.com/thing:4969225
PET is very strong and can handle high temperature. Avoid PLA as a solar panel may heat more than 70°C...
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2
Filament:
PET plastic bottle PET or PETG or ABSCategory: Electronics