1 / 4
Starlink Wall Routing Cable Guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cable guide sized for the Starlink long cable connecting the router to the dishy for through-wall mounting
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 74
- Makes
- 0
- Views
- 616
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This will fit snugly into a hole drilled with a ¾" spade bit with a bit of overlap you can use to glue/add a grommet for a good seal. The hole is designed for the Starlink dishy→router cable and works nicely for those of us who didn't want to buy a routing kit. The stickouts will bend in a bit and grab (not pinch) the cable and offer a bit of security i.e. the cable shouldn't slide in and out.
Print 2, one for the outside, one for the inside. I used Prusament PETG and it works nicely.