1 / 1
Sculpfun S9 drag chain holder - sits on X axis motor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This holder works with 10x20 mm drag chain. Also relieves to cables connected to motor on X axis.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 250
- Makes
- 0
- Views
- 1,307
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This drag chain holder will “sit” on X axis motor.
You will need two M5x12 mm screws with nuts to mount it above the X motor and two M3 screws with nuts to connect it with the drag chain (link below).
The other thing is that it will relief to the cable and connector leading to the X axis motor - you can use one plastic cable tie - as can be seen on the picture.
Works with this 10x20 mm drag chain: https://www.aliexpress.com/item/32999589537.html.