1 / 3
OrangePi 2 Zero HSW Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A way to mount an OrangePi 2 Zero to a honeycomb storage wall.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 21
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Inspired by a RaspberyPi Honeycomb Storage Wall mount.
This model should fit into the quad insert for the HSW. It's a very snug fit into the quad insert, but it will allow for an OrangePi Zero 2 to mount on it, or any other OrangePi with the same dimensions as the Zero 2.
It has cutouts for M3 nuts to be embedded, but the bolt holes are small enough that nuts will be optional.
Printed in PLA+ with 0.2mm layers. Infill can be low since there isn't a lot of weight. No supports required.