X Axis Motor Cover
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.74 – €0.91 net (excluding VAT)
For file: COVER_0.2mm_PETG_MK3S_55m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.83 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 55.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cover for the x-axis
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 56
- Makes
- 0
- Views
- 516
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I made a cover for the x-axis for a fantastic project from MW which can be found here:
X-axis upgrade with linear rail, belt tensioner and bearing clamping - Prusa MK3 / MK3s / MK3s+
No tools or additional components needed. Push fit.
Print from petg
Perimeters: 2
Infill: 15%
Layer Height: 0,20 mm
Support : No
UPDATE
13.04.2024
I added a new version :)
Parts printed together in multicolor mode as described in
https://forum.prusaprinters.org/forum/prusaslicer/manual-multicolor/