Flying Saucer Accent Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Land a 200 mm diameter flying saucer on your shelf or table. Uses a battery-powered LED strip in center ring.
- Rating
- 0 / 5
- Likes
- 39
- Downloads
- 100
- Makes
- 0
- Views
- 694
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Land a 200 mm diameter flying saucer on your shelf or table. Uses a battery-powered LED strip in center ring.
Print instructions
I printed everything at 0.2 mm layer height.
Use a light color for the light ring to make it easier for the lights to shine through.
The only part that needed support was the landing gear. I had the best results when using a raft. You may need to lightly sand the landing gear to get them to fit in the base.
Use a battery-powered LED strip inserted into the light ring. The model is sized for a 10 mm width strip and allows for a battery pack up to 20 mm thick.
I included files for both a one-piece top and a two piece-top. Print the screw top ring and screw top dome if you would like your flying saucer to have a different colored dome.