1 / 5
Tea bag dispenser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My settings. PLA. 20% infill. Depending on your machine you may need support on the upper edge of front opening.
- Rating
- 4.928 / 5
- Likes
- 2,237
- Downloads
- 5,533
- Makes
- 70
- Views
- 39,017
- Reviews
- 69
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mounting options.
1. Four 10x3mm or 3/8x1/8inch disc magnets. Put a small drop of super glue under each magnet.
2. Two #4 flat head wood screws don’t over tighten.
3. Double sided tape.
4. Command strips.
Alternate each tea bag 180 degrees front to back when loading into the dispenser.
Enjoy.
Update 02/12/2025: Just added a thinner walled and bigger bottom cutout version “Tea bag holder thin”. Plenty strong enough with less material.