mAx Team interior Upgrade for 3D SETS Model 14 (Max Team)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Transform your 3D SETS Model 14 Max Team as the mAx Team van with a 1 color 3D printer
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 188
- Makes
- 1
- Views
- 1,262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Warning
Tricky, it is a puzzle, but working fine for me.
Some parts required more than 18 hours to be printed.
Definition
None.
Printing
Not sure this mode could be printed on a Prusa Mini (has been tested on a Mk3S bed).
Infill 15%.
Use border for the top parts, the Middle Left A part and the Bottom Left A part.
Print 2 times the Interior Top Center part.
See the pictures to place the right faces on the bed.
Build
There is several holes for some screws but only the following screws are required to assemble the parts :
- Interior Bottom Left A + Interior Bottom Left B ; 2 M3x8
- Interior Top Left A + Interior Top Left B + Interior Top Right A + Interior Top Right B + the 2 Interior Top Center ; 4 M3x12
You can use a drill to make holes in the chassis to pass somes wires.
Feedback
It is welcome.
Remark
None.
Version
v1/v20230303 1st upload.