Bivona 3.5 Ped trach (EDUCATION)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D scan of a Bivona 3.5 Ped trach for use in medical education and play design. With hard plastic tube and without.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 118
- Makes
- 1
- Views
- 428
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Chemistry & Biology
- License
- Creative Commons — Attribution
This is a model based off of a 3D scan of a Bivona 3.5 Ped trach at Ann & Robert H Lurie Children's Hospital of Chicago. It's intended use is for medical education and fostering medical play opportunities. The inner cannel is included and is hollow but is not flexible if printed in PLA. Model is to scale but can be adjusted in the slicer to fit teddy bears, education dolls, or other resources as needed.
Print requires supports and is recommended to print at a 45° angle for strength and easier support removal. Typically printed using .12 layer heights and 20% infill.
UPDATE: Added model with out hard tube so a 1/8" OD silicone tubing can be used.
THIS MODEL IS ONLY APPROXIMATELY REPRESENTATIVE OF ACTUAL MEDICAL HARDWARE AND SHOULD NOT BE USED FOR MEDICAL REFERENCE