1 / 3
Printhead V2 Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a cover for the hotend fan
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 2
- Views
- 238
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Because i liked the original duct from CodeMonkeyZero i designed a cover for the hotend fan.
I'm using a Noctua 4020 as hotend fan and so the fan looked a little bit outside the duct.
Also my Kids are playing araound and i don't wanna an open fan at the front.
Its easy to print upside down.
I used PLA+ with 0.2mm layer hight and a 0.4mm noozle at 100mm/s printing speed. 18% infill is enough. With this the printing time was ~25min.