Turntable
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.39 – €1.70 net (excluding VAT)
For file: base_02mm_pla_mk3smmu2s_1h19m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.54 excluding VAT (range midpoint).
- Weight reported by the author
- 24 g
- Print time reported by the author
- 1.32 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
You want to presentate your prints on a very elegant way but you have no turning table? Here is the answer.
- Rating
- 4.5 / 5
- Likes
- 35
- Downloads
- 434
- Makes
- 2
- Views
- 8,209
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
You want to presentate your prints on a very elegant way but you have no turning table? Here is the answer. All you need is a 3D Printer, a 608 Bearing (O-Diameter: 22mm; I-Diameter:8mm), some rubberfeets and a sewing thread (about 40cm).
After printing the parts you have to press the Bearing in the 22mm hole of the Base.
Then you have to string the sewing thread to the unterside of the Plate (use the cross hole). Then wind up the sewing thread to the plate using the chamfered groove. Then stick the other side of the sewing thread to the small hole on the Base. Now you have to assemble the Plate into the Bearing.
Rubberfeet:
https://amzn.to/35Xs3to (Amazon Partner Link)
Bearing:
https://amzn.to/33O5rc8 (Amazon Partner Link)
Print instructions
Layerheight: 0,2mm
If the print of the Plate warp during printing use a small raft.