Dart Zone Dictator Thanhlon Mag
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An extended 30 round magazine for the Dictator
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 51
- Makes
- 1
- Views
- 1,039
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Share Alike
An extended magazine for the Dart Zone Dictator. You can load darts from either side, as many as you can fit. There are two versions: a single length version for printing on large format printers, and a two-half version with a binder piece in the middle.
The two halves of the magazine must be glued together; superglue works well.
If you have a large format printer, you will need:
2x thanhlon_dictator
2x ThanhlonFollower
2x Drum Spring
If you have a standard sized printer, you will need:
1x dictator_binder
2x thanhlon_dictator_left
2x thanhlon_dictator_right
2x ThanhlonFollower
2x Drum Spring