1 / 3
TriangleLab USB ADXL345 Mount for Aquila
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Screw-based mount to replace the provided Blue Tack.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 83
- Makes
- 0
- Views
- 881
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
According to Nero3D, mounting with screws instead of the provided blue tack provides a slightly more accurate measurement. This also allows mounting to the gantry instead of the shroud.
Use M2 screws/nuts to mount the PCB. Use M3 screws to self-tap into the pillars for securing to the printer. The smaller gap is just a bit bigger than the plate and is raised to avoid the roller wheels. The larger gap is for the bed and is much larger to allow for thickness variations between glass and magnetic beds.