1 / 3
Shelf peg - Vasemode
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a shelf peg that can be printed in vasemode.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Shelf peg
- Vasemode
- 6 min print
- Hole 1.3 mm
How to use:
- Push small nail through and hammer it to the side of the cabinet
- Nail is 1.1 mm diameter and 20 mm long
- Nail penetrates approx 13 mm with the peg
- You will need 4 of these to balance a shelf
Files:
- STL for printing
- 3FM Straight to printing! (Prusa MINI, PLA)
- SolidWorks for modifications (hole diameter for example)
- STEP for modifications (hole diameter for example)
This is modeled based on negative volume printing, therefore the image of the 3D-file does not match the end result!
Here is good tutorial to it (Not my video):