Wallet Phone Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made a printable version of this sleek phone stand. It is the same size as your typical credit card so it will fit…
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 158
- Makes
- 2
- Views
- 1,086
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a printable version of this sleek phone stand. It is the same size as your typical credit card so it will fit in your wallet on the go. I find it useful for long trips. Printed with all solid infill due to the thickness of the object. PETG was used for its strength and flexibility on the living hinges. I would assume PLA would snap after a few uses.
You will need to have your printer calibrated with a dialed in profile for PETG to get a good print. If there is an elephant foot on your first layers it will be difficult to get all the cutouts free to move.
You could also scale down the z-height of this model to get it to print faster. It is a bit thicker than the typical credit card, but I decided it was better for strength. If you try it at 1.2mm let me know... good luck.
*Updated: Some of the spots were widened*
Print Settings
Printer:
Two Trees Sapphire Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
0%
Filament:
Stronghero3D PETGTransparent Blue
Category: Mobile Phone