1 / 3
RatRig V-Core 3.x Power Box - Mini Edition
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Powerbox for RatRig V-Core 3.0 and 3.1, compatible with no enclosure or Enclosure 2.0
- Rating
- 4.667 / 5
- Likes
- 22
- Downloads
- 146
- Makes
- 2
- Views
- 715
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Powerbox for RatRig V-Core 3.x. Keep your mains writing tidy! It is unlikely that you will have the exact hardware, but please use this for inspiration and provide remixes. This remix is specifically for small V-Core printers, e.g. the 200, where space is at a premium.
BOM
| Item | Count | Description |
| IEC Power Filter (C-14) | 1 | Amazon |
| M5 x 12 - Countersunk | 4 | |
| M3 x ~10 - Countersunk | 5 | |
| M3 Heat Inserts | 3 | |
| ~6 x 3mm magnets | 4 | For box |
| ~6 x 1.2mm magnets | 4 | For cover |
| M5 3030 T Nuts | 4 | |
| M3 Nuts | 2 | For attaching IEC to plates |
Assembly
- Insert heat inserts into box
- Insert thin magnets into cover
- Insert thicker magnets into box
- Attach IEC to back cover plate with 2 nuts
- Attach back plate to box with M3 screws where the heat inserts are
- Wire everything up as you see fit, run wires out of the bottom of the box
- Attach front plate with M5 screws and t nuts
- Attach to right side of machine with 3030 t-nuts
Printing
No supports needed, 3-4 perimeters, 20% infill
CAD
Available @ OnShape