1 / 2
Machinist Oil Pot (Magnetic Base)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Oil pot and brush holder for cutting oil or similar
- Rating
- 0 / 5
- Likes
- 33
- Downloads
- 115
- Makes
- 0
- Views
- 568
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Oil pot and brush holder for cutting oil or similar, there is a cut-out in the base for a retained magnet (max diameter 25 x 3 mm) which will hold the pot solidly to your machine (it does double duty collecting swarf :-) )
Needs a pause set in slicer at 4mm height so you can insert the magnet (slide the layer selecter down to 4mm and right click, the select add pause). I added a sample gcode file to demonstrate this (0.6 nozzle PETG).
Use 3 or 4 perimeters and 6 bottom layers - try and make it a solid print.
Prints without supports.