Magnetic Bulkhead for filament dry box,
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bulkhead for filament dry box, using the magnetic joiner concept.
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 141
- Makes
- 4
- Views
- 1,200
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Bulkhead fitting for filament dry box, using the magnetic joiner concept.
requires a 12mm hole,
5mmx3mm magnets, qty 6 per bulkhead fitting and cover, available from Amazon :
5mm dia x 3mm thick N42 Neodymium... https://www.amazon.co.uk/dp/B01LCXPGXE?ref=ppx_pop_mob_ap_share
O-rings 9mm OD, 6mm ID, 1.5mm Thk also available on Amazon:
sourcing map Silicone O-Ring, 9mm... https://www.amazon.co.uk/dp/B08F27Y6BB?ref=ppx_pop_mob_ap_share
Added some additional photos showing how I flatten the end, and it stops it pulling back through the bulkhead, and the cover can be placed on to seal it up.