1 / 13
Bit stick with driver
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a modular bit storage system with a magnetic bit holder. Each section can store up to eight 25mm Bits.
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 82
- Makes
- 2
- Views
- 673
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Added short and medium handles
==============
Parts in STLs are oriented for printing.
Printed in ABS with 0.2mm layer height. Other materials might work.
Support needed for:
- MidPart_25mmBit
- BitHandle (Inside the hole for the bit)
Needed hardware for the handle:
- 1x DIN7991 M3x16
- 1x BallBearing 11x5x4 (OuterDia x InnerDia x Width)
- 1x Heat Insert M3x4x5
- 2x Magnet 6x3mm
BitHandle Assembly:
- Press the magents into MagnetHolder.
- Put MagnetHolder into BitHandle and screw in MagentScrew with flathead screwdriver
(Yeah, this may take some time :-) - Assemble heat insert into SpinnerBase and screw into handle
- Press in the BB into SpinnerBB
- Use M3 screw to fix the SpinnerBB to SpinnerBase
Note: After printing you may have to give the hole in the mid part a light sanding for easy clearance to the handle. This depends on the quality of your support.