Kobra Go Y Axis Tensioner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable Y Axis Tensioner for the Anycubic Kobra GO
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 262
- Makes
- 6
- Views
- 989
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted rid of the wobbly plastic pulley and the blue plastic.
This holds the new aluminum pulley snugly. Original designer did a great job all I had to do was shorten the attachment to fit the Kobra Go. The bolt threading is a bit tight so use a bit of soap or something plastic safe to get it worked in.
Needs a little persuasion to install but holds tight.
Need:
X3 - 3M_16mm bolts
X1 - 20 teeth, bore 3mm width 6mm Pulley
Bolt fits a 3mm pulley which is same axle size as original but won't fit the original wide crappy pulley. If you want a different size bolt please go to original design page.
I included all 3 Nuts so you can choose your favourite design
Printing:
Print everything vertical with plenty of Brim to keep it stuck to the bed and only the Base should need supports (build plate only)