1 / 2
Yubikey Sliding Sleeve
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a sliding sleeve with a latch for a Yubikey 5 NFC
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 323
- Makes
- 3
- Views
- 2,156
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I split the model into two pieces so that the inner side is as smooth as possible. Glued together with some drops of CA glue.
The latch on the bottom half needs to be wiggled a bit after printing so it can move freely. It has a little .2mm gap, so it should come loose pretty easy.
I printed it in PETG
Nozzle diameter: 0.4mm
Layer height: 0.2mm