1 / 7
Yaesu FT-891 Powerpole Conversion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Convert FT-891 factory Molex connector to a Powerpole
- Rating
- 5 / 5
- Likes
- 102
- Downloads
- 1,400
- Makes
- 5
- Views
- 8,667
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
>> This mod may void the warranty! <<
>> Modify the radio at your own RISK! <<
Order a kit:
Purchase a kit here: https://forms.gle/EGKaYYa485J8wiMW9
Go here for details: https://github.com/N0BOY/FT891_powerpole
Enjoy it! - Jason Wang, N0BOY
Changelog:
2023-03-02: FT-891 v2 released:
- Fixed backplate weak point
- improved screw clearance
Parts for DIY:
2 x 45mm / 1.8inch wire (strip 5mm / 0.2in on each end)
1 x M3 screw (12mm, Hex socket head)
1 x M3 nut
1 x Ring Terminals #6
1 x Powerpole
Print Settings:
Rafts: No
Supports: No
Resolution: 0.15
Infill: 20-30%
Filament: PLA/PLA+ works; PETG or ABS preferred
- For better mechanical strength, increase the wall line count to 3 or 4.
- For better UV and heat resistance, consider printing in PETG over PLA/PLA+. If your printer can handle ABS or Nylon, go for it!