Label dispenser up to 55mm
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€9.84 – €12.03 net (excluding VAT)
For file: dil 55mm FINAL bez textu_0.6n_0.35mm_PETG_MK3S_7h18m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €10.93 excluding VAT (range midpoint).
- Weight reported by the author
- 228 g
- Print time reported by the author
- 7.29 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
If you are looking for something what will hold your labels on one place and will help with their dispensing...
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 104
- Makes
- 0
- Views
- 702
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I have tried few versions online and at the end I decided to make my own design which is big enough, has the spool that can rotate for small and big labels, designed so you can pull to you or down, space for clamp, cover that fits in the hole and the tunel that does not create so big pull force but it will also not suck the labels inside. I have made like 5 versions to test it.
This is the clamp I will use to hold it in place https://www.aliexpress.com/item/1005004827679866.html?spm=a2g0o.order_list.order_list_main.5.15281802QL402u . Double sided tape or nano tape should also work.
Printed with no supports. 0,35 layer is OK with 0,6 nozzle. Material PETG. Hexagon spool not tested.