Housing for breadboard experimental board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Breadboardplate for maximum 2 long breadbords. Flexible arrangement with shorter breadboards and different processor
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 69
- Makes
- 0
- Views
- 678
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Breadboardplate ( aprox. 180x130x80 mm) for maximum 2 long breadbords. Flexible arrangement with shorter breadboards and different processor types ( Andruino UNO; MEGA; NANO; ESP 32 and so on) is possible. The experimental board can be protected from dust with a cover. This is divided, the smaller part has cutouts for a micro switch, a 0.96 inch OLED display and 3 LEDs. A STEP file of the cover without cutouts is included for your own editing.
The parts can be printed with 0.3mm layer height in PLA without support.
If necessary, the covers can be screwed to the base plate with 2x6 mm screws. The holes may have to be re-drilled.
The feet can also be attached to the base plate with 2x6mm screws or by gluing with superglue.
Translated with www.DeepL.com/Translator (free version)