Endoscope mount for Lee Load Master
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Endoscope holder for lee load master that can be fixed under the die nut and keep it steady and protected. My…
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 58
- Makes
- 1
- Views
- 717
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple Endoscope holder for lee load master that can be fixed under the die nut and keep it steady and protected.
My endoscope is really small (4.5mm diameter), for bigger endoscope you can simply drill the hole to make your fit properly, in this case I suggest to print with thick walls.
If necessary, for a better fit to the press, after printing heat the support at the base of the thin bracket and bent a little bit downward, in this way the endoscope will stay closer to the press head thanks to the elastic properties of the PLA, and the cartridge below will be perfectly centered in the image.
Fell free to remix and let me know what you think or what you would change ;-)
Print Settings
Printer Brand:
Artillery
Printer:
Artillery Hornet
Supports:
No
Resolution:
0.15 mm
Infill:
15%
Filament:
Sunlu PLABlack
Notes:
print with thick walls if you need to drill for larger endoscope
Category: DIY