Ultimaker Extruder Drawbolt Latch Pressure Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bertho's extruder upgrade works fine.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 270
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Bertho's extruder upgrade works fine. However the locking mechanism is the same old lever catch difficult to engage and disengage under full tension.
This is an easy to engage drawbolt latch for the extruder pressure plate.
Print instructions
Category: 3D Printer Extruders Summary
Bertho's extruder upgrade works fine. However the locking mechanism is the same old lever catch difficult to engage and disengage under full tension.
This is an easy to engage drawbolt latch for the extruder pressure plate.
Instructions
Print all parts at 100% fill with 0.1mm layer thickness.
1x 7x14x3.5mm (CS547) ball bearing
1x M3x30 bolt
4x M3x20 bolt
4x M3x16 bolt
4x M3 nylock nut
5x M3 nut
1x M4x50 hex head bolt
3x M4 washer
1x spring with k=6-7N/mm with ID slightly larger than 4mm. Bertho's spring calculations: http://www.vinland.com/Spring-Testing.html