KP3S or KP3S Pro, Sherpa-mini and NF Crazy/Mosquito lightweight toolhead
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Updated the fan duct to have more air flow by flipping the design. I would like to thank Okino for his orignal design.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 83
- Makes
- 0
- Views
- 1,602
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
The fan duct now has plenty more air flow and as you can see from the picture, the spider was printed with 50% fan in abs.
BOM:
- 2x m3x5x4 heat inserts (same as voron kits use)
- 3x m3 nuts (2 for bltouch, 1 for 5015)
- 2x m3 washers for the sherpa mini, feel free to use more wherever
Variety of m2.5 screw:
- 2x mounting screws for the plate to the heatsink from the top
- 2x m2.5x15 for 2510 fan
- 2x m2.5x8 for securing the heatsink from the back
Variety of m3 screws:
- 1x m3x22 for 5015 fan
- 1x m3x10 for right side of sherpa
- 1x m3x8 for front of bltouch
- 1x m3x14 for back of bltouch + left of sherpa
1st picture is an NF crazy, 3rd picture is a mosquito