E3D v6 clone Silicone Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a silicone cover for the E3D v6 clone from Banggood ( https://bit.ly/3jfFqsQ ).
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 50
- Makes
- 1
- Views
- 535
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a silicone cover for the E3D v6 clone from Banggood (
https://bit.ly/3jfFqsQ
).
It might fit for others too, but I did not check that.
Instructions:
Print everything with about 20%-25% infill. You should print the parts with 0.1mm layer height for a smoother finish.
To fill the silicone into the mold I use these needles and a normal syringe
http://bit.ly/3Fx9dtq
Wait about 2 hours till the silicone is dry to clean everything.
BOM:
6x M3 screw (6mm)
https://bit.ly/3izqOcy
E3D v6 Clone Hotend
https://bit.ly/3jfFqsQ
1x 6mm metal pipe
1x silicone (shore 33 up to 450 degree Celsius)
https://goo.gl/yVxw4y