Shelf Pole Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.62 – €0.76 net (excluding VAT)
For file: Laundry_Room_Shelf_Bracket_PLA_15.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.69 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 49.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement bracket for a shelf clothes hanging pole
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 1
- Views
- 220
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
My wife had a plastic bracket break that held her clothes' rod to the above shelf. So I made one from the old one out of PLA. I used PLA mainly because I had gray and that is what the others were. It works very well. I made this about .100" bigger than the original to help strengthen the section that broke on the original.