Filament storage rack for IKEA Samla 22 l
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.44 – €4.20 net (excluding VAT)
For file: FILAMENT ROLL SUPPORT PLATE IKEA SAMLA 22L (2x)_0.2mm_PLA_MINI_3h55m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.82 excluding VAT (range midpoint).
- Weight reported by the author
- 46 g
- Print time reported by the author
- 3.91 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Rack to store filament in IKEA Samla 22 l storage box.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 117
- Makes
- 3
- Views
- 2,189
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Rack to store up to 4 kg of filament in IKEA SAMALA 22 l storage box. Each plate has 1 threaded hole and 1 smooth hole which enables the rack to be clamped in the box. Perfect (dry)box solution for occasional printing without too much work in building the solution.
The threaded rods allow for a optional future upgrade with filament on roller bearings (608). The filament can then be drawn from inside the box if you need the filament to be dry constantly in case of a printfarm for example.
Support plates in pictures are printed with Prusament recycled PLA, layer height 0,2 mm on a Prusa MINI.
Required materials
(2x) Threaded rod M8, length 33 cm
(2x) Filament roll support plat ikea samla 22L (Enclosed STEP file)
Assembly
Screw a threaded rod all the way in each plate
Slide plates with threaded rod into each other to create rack
Place rack in container
Unscrew both threaded rods to clamp the rack in the container
Recommended additional materials
1 kg silica gel
Hygrometer