1 / 2
Automatic Plant Watering System container
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A container for my automatic plant watering system.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 54
- Makes
- 0
- Views
- 947
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Following the many tutorials you can find on the internet, I built my automatic plant watering system.
Here I'm sharing the box I designed to contain the different parts. The details on the kit I used can be found on GitHub https://github.com/WayinTop/Automatic-Plant-Watering-System-Tutorial.
Printing settings I used:
- PLA filament SUNLU
- Layer height 0.2 mm
- Infill 20%
- Wall Line Count 3
The holes on the bottom are suitable for M2 screws while the holes on the side of the box allow the cables to go outside: the power cable for the Arduino 1 and the sensor cables. It's not possible to power it using the USB cable.