Finger Fidget Skateboard
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.83 – €1.02 net (excluding VAT)
For file: CE3_5S.1-Skateboard.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.93 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 1.1 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Race your finger skateboard around the desk, etc. A perfect Fidget!
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 51
- Makes
- 0
- Views
- 719
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
This skateboard is a great fidget. It uses 6 mm outside diameter bearings for wheels.
The 4 bearings are from Amazon, 50 pieces, $11, PN 683-ZZ ball bearings.
The 2 axles are 3 mm brass round rods, lathe bar stock from Amazon, Favordrory, 20 pieces, $10.
A burr is left on the brass axel when it is cut to size with a cutter. This burr retains the bearing on the axel.
If you don’t want to buy the rod and bearings, I have extra and will send to first four that ask me for the axles and bearings with their USA address. No charge.