1 / 3
Lamp C Clamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
C clamp for swing arm desk lamp
- Rating
- 4.833 / 5
- Likes
- 58
- Downloads
- 670
- Makes
- 6
- Views
- 2,138
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Build at 0.2 layer height for thread to be printed correctly, I would suggest using ASA, PETG or PC. The support disc to screw is a push-in, clip-in ball joint socket. Also clean the threads after print before assembly. Also support disc is installed after threading the screw into the C Clamp.
Changelog:
v2.1 2024-04-14
- Added version with M3 screw holes to help prevent cracking in corners
v2.0 2023-09-15
- Made rounded corner inside “C” to help prevent cracking from 90 deg corners
v1.2 2023-06-05
- Added double wide version, for when more holding force is needed
v1.1 2023-03-17
- Added a Interference fit tube to provide better fit and hold for not level installations.
- Added individual STL files, one can print the C-Clamp flat on one side at 0.3mm layer height (or bigger if you have the right nozzle). the screw needs to be printed at 0.2 or smaller layer height to get a good thread.
v1.0 2023-03-11
- Initial Release