Dock for AirPods Gen 1 or 2 and Apple Watch 7 (with or without a protective cover on the watch)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This charging base was made Apple Watch Series 7 45mm with an Otterbox protective case and AirPods Gen 1 or 2
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 88
- Makes
- 0
- Views
- 546
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
This charging base was made for my Apple Watch Series 7 45mm with an Otterbox protective case and AirPods Gen 1 or 2
It also has a second base for use with a bare watch.
There is 2 bodies. 1 was made to use the 2022 USB-C cables supplied with the devices from Apple.
USB-C Lightning plug hole for AirPods is 9.14mm x 5.50mm and it is held in place with a screw.
The other is for the older USB-A Lightning cables.
USB-A Lightning plug hole for AirPods is 7.8mm x 5.25mm and it is held in place with a screw.
The watch charger is a press fit, Hole is 27.8mm in dia, no glue required and has a hole behind it so you can remove the watch charger without any damage.
It requires 3 off M3x10mm Cap screws (every Prusa printer has these left over)
This is based off my other dock https://www.printables.com/model/406846-dock-for-airpods-pro-and-apple-watch-with-or-witho
Mine was printed on my Prusa MK3S in Pistachio Green PETG
Print at 10% infill (adaptive cubic) no supports are required on the base pieces and supports only required just in the middle of the top part. (all setup in the 3MF file)
Just hide the base and top you don't want at the time of slicing.