Rack mount network switch bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket to rackmount a small network switch.
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 222
- Makes
- 3
- Views
- 2,108
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This is a bracket to rack mount a small network switch. It is printed in 3 modular parts. Due to each part being modular, you can mix and match to mount up to 3 network switches in a 1U space.
The hardware required for this system is as follows:
- 2 x M3x10mm Bolt
- 2 x M3 Nut
These switch mounting modules are parametric, allowing you to customise the dimensions to suit your own switch. The network switch used in this example was a TP-Link LS105G, therefore the default values are for this switch.
All parts were printed in Prusament PETG, face down at 0.1mm layer height, 30% infill and supports on only the male interlock sides. I suggest organic supports for best results. These settings worked for me but your milage may very.