Drywall Sanding Vacuum Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to attach a vacuum hose to a drywall sanding sponge
- Rating
- 5 / 5
- Likes
- 44
- Downloads
- 250
- Makes
- 2
- Views
- 1,876
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are adapters to hold a drywall sanding sponge while attached to a vacuum hose to minimize dust during sanding. Channels around the sponge allow airflow from the sanding surface to the attached hose. Sponge is held in with a friction fit to the base. Two different sizes of hose and sponge a provided. Attach adapter to base using M3 screws. Holes in the base are sized for 3mm heat-set inserts. No supports needed. Printed in PETG.
Adapters for 22.5mm hose and 30mm hose.
Sponge holder for 73x123 (large) and 100x67 (medium) drywall sanding sponge.