1 / 2
Loxone NFC Code Touch compatible cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A customizable cover compatible with Loxone NFC Code Touch to protect it against the weather.
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 445
- Makes
- 3
- Views
- 1,908
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
This cover was inspired by Davejje's model. The measurements for the default values were measured and ultimately copied from that model. Those values are compatible with the “Loxone NFC Code Touch”, 2nd generation.
The OpenSCAD script allows you customize the following aspects of that model
- width, height and depth of the cover
- you can independently set the depth of the top and bottom edge
- side- and back wall thickness
- diameter of cutout for cable access
- distance between screw cutouts (they are placed around the center)
- height and width of the screw cutouts
- width and height of access cutout
The parameters are explained in one of the images.
I don't recommend using PLA for the cover, since it is very likely that it will get brittle and disintegrate after a while. I've printed this with Prusament PETG Urban Grey.
Updates
- 2023-03-16 Added a top slant parameter, which should help to avoid water pooling.