1 / 4
Overhang Test in Four Directions - 65 to 75 degrees — image 1
1 / 4

Overhang Test in Four Directions - 65 to 75 degrees

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I'm working on a parts cooling fan duct for my QIDI Tech X-Max printer and needed an overhang test that tests the part c

Rating
4.714 / 5
Likes
29
Downloads
476
Makes
6
Views
1,825
Reviews
7

Updated at source:

Model information

Category
Test Models
License
Creative Commons — Attribution — Noncommercial

Update July 28th, 2020:

Added a smaller version scaled at 75% for a quicker print time and to save filament, it's less than 5 grams. It's big enough to determine cooling quality but the normal version is a little easier to see the differences between different cooling options.

Support

All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)

https://www.paypal.me/humebeamengineering

About

I'm working on a parts cooling fan duct for my QIDI Tech X-Max printer and needed an overhang test that tests the part cooling in four directions and not just one like most tests. I also need the test to be challenging for the printer so I went straight to the difficult 65-75 degree angles and skipped the "easy" overhangs.

One side is numbered 65-75 (facing towards you when printing) so you know the direction if you want to compare different cooling options. The test sits on a thin platform for good bed adhesion, you can break it off after printing if you like.

Don't despair if you don't get great results with this test, it's meant to be difficult to print so you can pinpoint where improvements in cooling need to be made.

Tags