42 - Version16
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.48 – €0.59 net (excluding VAT)
For file: 42coin-coin_02mm_pla_mk3s_37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.54 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 37.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The Answer. Also, just having fun trying out a some 3D CAD and printing ideas. More versions on the way.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 105
- Makes
- 0
- Views
- 400
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Public Domain
The Answer.
Also, just having fun trying out a some 3D CAD and printing ideas. More versions on the way.
This one : 42 Coin
Forty two Altairan dollars, legal tender anywhere in the galaxy. The coin is 42mm in diameter; the milled/reeded edge has 42 serrations.
OnShape 3D CAD files :
Print instructions
Print in PLA using the 3mf file provided; otherwise :
- perimeters =3
- infill = 100% rectilinear
- speed (Bridges) = 20mm/s
Print dolphin side down with no supports. I reduced the speed on bridging from 30 to 20 mm/s to help improve the print quality.
The first layer prints some very small bits, so a clean print sheet with a bit of glue is recommended to get good adhesion.