Fleur Wand Dual Color
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.04 – €0.05 net (excluding VAT)
For file: Fleur_d-shape_connector_Printables_0.6n_0.4mm_PLA_MINI_2m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.05 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 1.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A dual color take on Printer42's Fleur Wand. Print the handle in one color and the shaft in another
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 145
- Makes
- 0
- Views
- 903
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Public Domain
A dual color take on Printer42's Fleur Wand. Print the handle in one color and the shaft in another. Upon cutting the wand in PrusaSlicer I noticed that there was already an internal D-shape hole for a connector.
So I modeled up d-shape connector in Onshape. https://cad.onshape.com/documents/2dcd7cc0aed666dfdac68860/w/3ec269fd33df8e46a305f54f/e/279268e86248854de78226ce?renderMode=0&uiState=640fe0b7689e8c3cae959385
A STEP file is also included.
This size had more than enough clearance to fit the wand. could be tighter if you wanted to increase the scale. But I had no issue 3DGlooping the connector to the handle then 3DGlooping the handle assembly to the shaft. https://www.3dgloop.com/
Might be worth it to pick a different orientation for printing the shaft if your print volume supports it. this was the best I could do while minimizing support filament and fitting it in the volume of my Prusa Mini.