PETG Tungsten 75% Calibration Block
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Calibrate your printer before printing large parts!
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 265
- Makes
- 5
- Views
- 3,878
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Calibrate your printer before printing large parts! For this, we designed this calibration block that should weigh at least 5.4g, when printed. We recommend printing it and weighing it before you start creating large, heavy and expansive parts. This way you can find out whether your printer is in the best condition that is necessary for successful printing with Prusament PETG Tungsten 75%. If you see any flaws on the block or find that the weight is significantly lower than 5.4g, clean your printer thoroughly and repeat the process.
We only offer g-code. This is because the print settings cannot be changed to maintain the correct calibration block values.
You can change the print speed on the printer.