Bambu X1C / P1P 24V AMS to 5V USB Power Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plug in lights or other USB items powered by your AMS 24V - Box to keep things tidy!
- Rating
- 5 / 5
- Likes
- 162
- Downloads
- 233
- Makes
- 4
- Views
- 14,169
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
I wanted LED lighting on my X1C but didn't want another plug. By powering off of the AMS I can use a single smart outlet for the whole thing. Works great!
Use this box to bundle wires behind your printer and power lights directly from the AMS
Requires:
- 6 pin AMS cable from Bambu Lab https://us.store.bambulab.com/collections/ams-and-parts/products/bambu-bus-cable-4pin?variant=40475102937224 (One cable actually makes two of these, since you're cutting it in half)
- 24V to 5V converter like this https://www.amazon.com/gp/product/B0B24MF21J/
- Wire connectors, solder, heat shrink, etc (I used https://www.amazon.com/gp/product/B073RMRCC3/ )
- 3× M3 x 20mm bolts for holding the USB connectors inside the box (I used https://www.amazon.com/gp/product/B07W4CW91J/ )
- 1× M3 x 8mm bolt to screw the box onto the back of the X1C (replacing a M3 x 4mm bolt) (Included in the kit above)
Assembly:
- Glue the Bambu logo pieces onto the box if printed separately
- If you're using the transformer above, the USB ports won't fit side by side without some cutting. I used a dremel to notch the shared middle connectors so they could both use the same bolt. See photos. I also trimmed a bit of extra rubber off the end of the USB ports.
- Attach the USB connectors to the USB cover plate with bolts
- Cut the 6 pin AMS cable in half and expose the 6 wires. Yellow is positive (+) and red is negative (-). Wire the yellow from the 6 pin cable to the red on the transformer and the red wire from the 6 pin cable to the black on the transformer.
- Use wire connectors, heat shrink, etc for a secure connection to the transformer.
- Bolt the box to the back of the Bambu housing, plug it all in, and slide the cover shut.
- Plug in your USB lights, camera, etc!
Thanks to Ian Kennington on Facebook. Remixed to add 10mm of length, adjustments to the USB insert piece, and added sturdier pins to hold the transformer into the box.
If you're using the parts above, use the latest version of all files below. I included some earlier versions for more compatibility with other parts.