Pool Drainer for Garden Hose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed to get the last bit of water out of the pool before fall and the pump was sucking air through the open end of…
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 128
- Makes
- 1
- Views
- 1,199
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Needed to get the last bit of water out of the pool before fall and the pump was sucking air through the open end of the hose with too much water left behind for evaporation to handle.
I used a garden hose male that I found on Thingiverse somewhere and added a flat plate w/ 6 4mm channels feeding the center. It might need the channels to be a little smaller, but it let me get enough water out that the rest evaporated before it had time to get yucky.
Print instructions
Category: Outdoor & Garden Summary
Needed to get the last bit of water out of the pool before fall and the pump was sucking air through the open end of the hose with too much water left behind for evaporation to handle.
I used a garden hose male that I found on here somewhere and added a flat plate w/ 6 4mm channels feeding the center. It might need the channels to be a little smaller, but it let me get enough water out that the rest evaporated before it had time to get yucky.
Print Settings
Rafts: Doesn't Matter
Supports: Doesn't Matter
Resolution: 0.2
Infill: 10% or so
Notes:
Use enough perimeters for the GH port to be solid.