1 / 4
Genmitsu 4030 Z-Axis linearrail mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reinforced z-axis with linear rail and 2 carriages.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 47
- Makes
- 0
- Views
- 885
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Reinforced the z-axis with an MGN9 linear rail and 2 carriages.
Be careful when drilling out the nut block. Do not go deeper than 5mm.
Use the printed part with a 3-3,5mm drill to locate the center and punch it with a hammer.
Check if your linear bearing have the same screw pattern and overall dimensions!
Print the part in the same orientation as in the assembly, use 5 walls and 40% infill.
I used PLA for max stiffness and to prevent creep.