1 / 2
Single Adapter (vase mode)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Single Adapter for 45rpm records, printed in vase mode in about 5 minutes with a 0.8mm nozzle.
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 105
- Makes
- 2
- Views
- 519
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Because it's printed in vase mode, the size has to fit the nozzle size – I printed mine with a 0.8mm nozzle in PLA. Because the adapter is a tight fit, in can be used to press the disc onto the turn table, making it sit flat.
STLs are provided for 0.8mm and 0.4mm nozzle. Printing with a 0.8mm nozzle took about 5 minutes. The FreeCAD model has the relevant parameters in a spreadsheet, so it should be easy to adapt.